I have to admit, I’m rather excited about the new Panasonic DVX200 4K 4/3″ sensor camera. Meant to be the “successor” to the legendary DVX100, the DVX200 is designed and priced to make big waves. Since it’s designed/intended to be a companion camera to the new Panasonic Varicam 35 4K, I would also expect it to have damned impressive image quality. Panasonic claims 12 stops of latitude. It does not have in interchangeable lens mount, but the built-in 13X Leica Dicomar 4K lens should be just fine for almost any shooting situation that this camera is intended for.
It’s definitely designed as a hand-held run-and-gun camera; lightweight and easy to handle. I can’t wait to try one in the field. Here’s what we know about it so far:
12 stops of latitude
4K/60p max frame rate
Leica Dicomar 4K 13X zoom lens with f/2.8 aperture
I’m pissed off. Say that in your head like Eric Cartman would, because that’s how I’m saying it over here…
I’m pissed off at Panasonic for letting the AF100 line just die. It hasn’t been discontinued, but it hasn’t been updated. It looks like they’re just not thinking about it at all, and to me, that’s a damned shame, because the AF100 is still one of the best workhorse run-and-gun cameras I’ve ever used. If Panasonic had continued to innovate and update the camera, then by now it could very well have been Panasonic’s “Sony FS7” and I think that’s why I’m choosing now to get riled up about it.
Sony released the FS7, and on paper, it looks pretty bad-ass. And in pictures, it strongly reminds me of the AF100 in size and form, which got me to remembering how much it sucks that the AF100 hasn’t been updated since the fake-10-bit “A” variant. The FS7 looks really, really good, but I’m a Panasonic guy. I love the way Panasonics shoot, and I love their picture quality. They look so much more organic and filmic to me than the Sonys do. Dammit, Panasonic, don’t make me buy a Sony!!!
That’s the reason why I’m so upset; I’ve admitted to myself that I really want the FS7, but if the AF100 hadn’t been forgotten, it could easily have evolved by now to what the FS7 is: a sub-$10K large-sensor, interchangeable-lens 4K camera with flexible ergonomics and overcranking abilities. I keep looking at the specs of the FS7 and I can’t find anything wrong with it, even though I really want to. The only thing that made me scrunch my face up was that ProRes recording requires an extra module and a “future upgrade.” Sounds fishy to me. And expensive. But hey! 4K DCI 12-bit RAW external recording? I’d buy a Shogun for that. For sure.
There really is no other point to this post than me blowing off steam, and begging Panasonic to surprise me with something awesome before I pay off my AJ-PX270 and start saving for the FS7. Maybe by Christmas? I’ve been a very good boy, after all.
On Monday, I ventured down to Padre Island and Corpus Christi, Texas, to shoot some b-roll for a documentary project I’m doing this summer. I also wanted to take the opportunity to test out a couple of cameras: the new Panasonic AJ-PX270 P2 AVC-Ultra small-body broadcast camera, and the Blackmagic Pocket Cinema Camera, configured with a Century Optics 1.32X B4-to-Super16 converter and a Canon HD 18X ENG zoom lens.
I’m more impressed with the PX270 every time I shoot with it. My last 1/3″ cam was the Panasonic HPX170, which was a great camera – for certain applications – but the PX270 is so much better, it’s usable in many more situations than the HPX170 was. To begin with, the picture is way better. The dynamic range and sharpness is greatly improved, as is the highlight roll-off, especially. Out of the box, the PX270 had a crappy image (over-sharp, gritty, and flat) because of the way the camera is set up from the factory, but after I spent a little time dialing in and customizing the picture by creating my own scene file, it became superb.
The PX270 is the first small body camera in the Panasonic line that is AVC-Ultra equipped (AVC-Ultra is what Panasonic is calling its group of professional AVC codecs; there is no codec called AVC-Ultra). AVC-Ultra codecs include AVC-Intra 100 & 200 (upgradable option), AVC-Intra 50, & AVC-LongG 50/25/12. It also shoots in good old DVCProHD if you need it to. The PX270 also features many more professional menu options and picture/color tweaking capabilities than any previous small body Panasonic. I think it actually has the same menu structure and options as the new AJ-PX5000 2/3″ shoulder cam, which lists for about $25K, sans glass. The PX270 was intended to be used as a companion to the PX5000 if needed, and I can easily see how the quality could keep up with the big brother. The PX270 really is a broadcast-quality camera.
Yet another reason why the Atomos Samurai is one of the best things to hit the video market since DVCProHD: If you have an all-day video job, you don’t have to worry about media, and you don’t have to use tape. A cheap 750GB 2.5″ HDD means I can bypass in-camera compression and record from uncompressed HD-SDI for up to 15-hrs straight in 720/30p if I need to. Hooray for cheap media!
I love to support local filmmakers, especially students and those just starting out on their independent film careers. Last night, Branden, a friend and local film student, needed some help with a camera yesterday to finish shooting some scenes for his current film project, so I brought over my Samurai and AF100 for he and his crew to use. While I was there, I snapped a few pics for fun.
The very talented Lawrence Mercado (http://notbotfx.com) was on hand to make up the lead actress to look like she’d been abused, and I must say Lawrence outdid himself. What an amazing job! The best part of the story is that she had to walk into a Walmart after the shoot, looking like that, because she needed to get makeup remover. Unfortunately, none of us had a GoPro to stick on her for that so we could record people’s reactions!
Check out the new mini Panasonic HX-A100 video camera. It looks pretty sweet. Depending on the price, I think I’d get this over a GoPro. It includes an ear clip so you can wear it without a helmet, or strapping a mount to your head. I like that.
So, I did something cool today. I took an old Cooke Kinic 1″ (25mm) f/1.5 lens made by Taylor Taylor & Hobson c. 1950, and mounted it to my Panasonic AF100 video camera. The Kinic is known as the king of the vertigo lenses, as it produces some amazing swirly bokeh around the outside of the frame. Some call it nausea-inducing, and I can see their point. I’m not sure if TTH meant to do this or not, but considering that Cooke lenses are known for their exceptional quality all the way back to the 19th century, I’d like to think they did.
The Kinic was originally made for 16mm movie cameras like the Eyemo and Filmo models. If anyone knows of sample footage from these cameras where the Kinic was used, please let me know; I’d like to see what the image looks like. Personally, I think the Kinic is fabulous for special effects shots like dream sequences, flashbacks, etc. I certainly wouldn’t use it for everyday footage, since the AF100’s imager is much larger than the 16mm frame that the Kinic was originally intended for, where the ultra-swirly outer edges of the picture would not be visible. // Below is some footage I shot in my front yard. This is not raw footage; it has been graded using DaVinci Resolve 9. Check it out:
The New York Times called me yesterday about shooting an interview of San Antonio mayor Julian Castro, who will be making the keynote speech at the Democratic National Convention in a couple of weeks. The shoot, which was this morning, went really well. Mayor Castro is always nice, respectful, and reserved. Plus, he’s a great interview. I can see why the Democratic party is grooming him to be a future superstar. As a San Antonio native, I have to say, he’s arguably the best mayor we’ve ever had. I enjoyed this assignment very much, and of course the AF100 was awesome.
I used my Nikon glass for this one, and a three-head fresnel kit. It was a very basic setup, but the results were great. I wanted to roll to the Samurai, but since I knew I was likely going to have to transmit this footage, ProRes422 was right out, and instead I opted to record to AVCHD. I didn’t mind, since it was destined for the web, and also I knew that the footage wasn’t going to have any large color moves applied to it. Note how dirty my camera is from filming outside for thirty days during a very hot and dusty South Texas summer. Maybe I should do some detailing this week…
As some of you may already know, I started working on a new feature film called “Champion,” as Dir. of Photography/Cinematographer. It stars Dora Madison Burge (Friday Night Lights), Cody Linley (Hannah Montana), and… wait for it… Lance Henriksen (every awesome movie, ever). I’ll cut to the chase: I’m approaching 40, and had no idea who Dora or Cody were before they signed up for this film (but it turns out they’re awesome). But Lance Henriksen?! How effing sweet is it that I get to have one of my all-time favorite actors in front of my lens? I never would have thought I’d get this opportunity. Strap in, because I’m going to gush about this for a while.
Like many people who are about my age, I first saw Lance in James Cameron’s “The Terminator” and again in “Aliens” in 1986, as the android synthetic human called Bishop. We all know how bad-ass the knife scene in that film was, and so far, everyone on set has been able to keep their cool and not ask him to do it. No-one wants to be “that guy.” He really did do it, BTW, and he said that Bill Paxton didn’t know about it beforehand; Paxton’s surprised expression while Lance was stabbing the knife between his fingers was authentic.
Since “Aliens,” Lance has been one of my favorites. His roles are always just so cool. But what I really love about working with him is the fact that Lance Henriksen the man is simply a dream to work with. He’s incredibly nice, laid-back, professional, and his experience really adds to the production. All of us on the crew of “Champion” will be better filmmakers after working with him. During breaks on set, Lance can often be found “holding court” as the crew gathers around him to hear his stories.
Now, on to the tech: We’re shooting “Champion” on two Panasonic AF100 cameras capturing footage to Atomos Samurai recorders. Day One was a test of our patience, however, when one of our Samurais kept spontaneously turning itself off. After a firmware update failed to fix the problem, it was determined by the Atomos LA office that it was a faulty unit. They overnighted a new one to us the next day. I call that some pretty sweet customer service. Since then, both units have been flawless. Using the Samurai in the field is a dream. I wish they had brighter screens, though.
Both of our Samurais are running AtomOS 3, which adds some awesome and much-needed features to the unit, including peaking, zebras, false color, and the ability to not only mark clip ins and outs during playback, but also export XML so you can then open your rough cut in Final Cut Pro. Talk about a time saver: you can do your rough edit in the car on the way back from the set! I still wish the screen on the Samurai was brighter, but I can live with it, since I’m using my Cineroid most of the time anyway.
Since our MacBook Pros do not have eSATA ports, one piece of new technology that has made life easier on set is the new LaCie Thunderbolt to eSATA hub, which makes things flow much faster and allows us to save a lot of money in the storage budget. Footage can be backed up on multiple eSATA drives by our dailies editor without wasting any time. Before, we had to use USB 2.0 or FireWire docks, which was excruciating, considering we’re shooting about 100GB of ProRes footage per day. Yay for Thunderbolt. I just wish the Thunderbolt architecture would mature faster with third party suppliers. There aren’t many Thunderbolt products out there, which really confuses me, considering how fast it is.
I’ve been dialing in my ENG-ized AF100 for some time now. Recently, I added a Varavon lens support to relieve some tension from the not-so-robust Micro 4/3 mount. The Varavon works really well, and I especially like that it has a rubber strap that holds the lens down onto the post suport. This not only provides negative-G stability, but also prevents the lens from torquing the mount when I’m using the ENG hand grip.
On July 4th, I was hired by the San Antonio Scorpions professional soccer team to shoot some b-roll before and during their game against FC Edmonton. I thought this would be the perfect chance to try out the new rig. I wanted to make it as light as possible, so I elected to remove the Anton Bauer plate and battery, which powers the lens’ servo zoom, and just roll using manual zoom instead. The total package consisted of AF100 body, Fujinon 10×4.8 Super-wide ENG lens, rails, Atomos Samurai, and a Cineroid Metal HD-SDI EVF.
The client wanted 720/30p for web and broadcast use. I set the Samurai to record ProRes422 LT and it looked great. A lot of people overlook LT but it’s superb when you want to save space and you’re not going to be doing heavy color moves in post. Even though it’s “LT” it’s still a heck of a lot better than AVCHD. I recently switched to Intel X25 SSDs in the Samurai, and I couldn’t be happier with them. Fast and tough. That’s all I can ask for. I was using a Corsair SSD, and after three RMAs from failed drives, the switch to Intel was needed.
Here is a two-minute reel of raw clips from Wednesday night. These are ungraded, straight from the camera: