Category Archives: Frame Grabs

My AF100 ENG Kit is Shaping Up

I’ve been modifying my Panasonic AF100 to work with ENG lenses, and it’s finally taking shape. The only thing I have left to install is a Y-cable that will power the lens as well as connect to the camera’s LANC port in order to activate REC start/stop from the lens. Abel Cine makes such a cable, but it’s 260.00, which is considerably more than I was hoping to pay. However, I don’t think anyone else is making it, so it looks like I’m going to have to fork over the cash to them.

Panasonic AF100 ENG Kit with Fujinon 10x4.8 Super-wide lens, Cineroid Metal EVF, and Atomos Samurai recorder
Panasonic AF100 ENG Kit with Fujinon 10x4.8 Super-wide lens, Cineroid Metal EVF, and Atomos Samurai recorder. Anton Bauer battery powers the ENG lens' servo zoom.

The latest addition to the kit is a Cineroid Metal HD-SDI electronic viewfinder, mounted on a NOGA articulated arm. The Cineroid arrived a couple of days ago from B&H and it really makes all the difference regarding usability of this rig in the field. Prior to getting the Cineroid, I pretty much had to mount the camera on a tripod to shoot anything. Moving the entire rig back on my shoulder and using the EVF makes all the difference, obviously. When I mounted the Cineroid, I moved the Atomos Samurai recorder from the front-left rail to the right-rear since I no longer needed to use it as a monitor when shooting. In its new position, it can serve as a secondary monitor for the director, and also provides some needed counter weight to the right side of the rig, since the EVF made everything shift left a bit. The Samurai is very reliable, and the battery life averages ten hours on a full charge, so I’m not too worried about not being able to see it while shooting hand-held footage. I know that if the camera is rolling, the Samurai is rolling. It tucks in nicely next to the Anton Bauer battery. You may recognize the AJA accessory plate and rail mount that the battery is bolted to; it used to hold my AJA Ki Pro Mini, which I ditched in favor of the Samurai. BTW, if anyone wants one, I’m selling a Ki Pro Mini…

Panasonic AF100 ENG Kit with Fujinon 10x4.8 Super-wide lens, Cineroid Metal EVF, and Atomos Samurai recorder. Anton Bauer battery powers the ENG lens' servo zoom.
Panasonic AF100 ENG Kit with Fujinon 10x4.8 Super-wide lens, Cineroid Metal EVF, and Atomos Samurai recorder. Anton Bauer battery powers the ENG lens' servo zoom.

To mount the ENG style Fujinon lens, I ordered an adapter from eBay user ciecio7. I highly recommend his adapters, as they seem to be very well built. In fact, this B4-M4/3 adapter is the highest quality I’ve yet seen from any of the adapters I’ve ordered for my AF100; I wish I’d found him earlier. Ciecio7 offers two flavors of this adapter; one with and one without the tripod collar. I ordered the one WITH the tripod collar, as I knew I was going to have to fashion some sort of lens support, since the camera’s lens mount is only rated at four pounds. Otherwise, it’s a sure bet I’d rip the mount right out the first time I used it in the field. I initially feared that it was going to be costly to get a really good lens support that would secure the lens in all directions so I could use the ENG grip, but as it turned out, the threaded 3/8″ hole in the mount adapter’s tripod collar (it also has a 1/4-20 hole) aligned perfectly with a threaded 3/8″ hole in the Redrock Micro M2 baseplate, so all I had to do was get a threaded stud from Home Depot and hacksaw it to 2.75″. That was $1.75 well-spent.

AF100 ENG lens support stud mounted under Fujinon 10x4.8 SD lens
Home Depot Special: AF100 support stud mounted under Fujinon 10x4.8 SD ENG lens

I really, really love having a proper ENG lens to use on the AF100. It really takes this camera from being quirky and odd to being a serious camera for pro video work. When Panasonic released the AF100, I was elated at the thought of what was basically a large-format HPX170 (although without my beloved P2 media), but then I was immediately puzzled when they kept demo-ing the camera with those horrible, slow, M4/3 stills lenses. What?! No servo lens? Unbelievable. So, for a long time, I used my Canon EF 16-35/2.8 L zoom with the Redrock Micro Live Lens adapter as my go-to run and gun lens, and it worked great. Not much reach, but it had the wide-to-medium area covered fairly well, and it was just fast enough to use in low light. It sucked not having a servo zoom though. With this ENG setup, now I have the best of both worlds. Granted, with all of the kit, it makes the AF100 about the same size as my HPX2000, but it’s still lighter.

So, what about image quality? ENG lenses are designed to be used on three-chip cameras, which means the glass projects onto a prism that separates the image into red, green and blue paths. There are two methods of adapting your ENG lens to a Micro 4/3 camera: the “cheap” way, which is to use a lens with a built-in 2X extender that will double the size of the image circle to cover M4/3, or the “proper” way, which is to use Abel Cine’s HDX2 adapter, which not only doubles the size of the image circle but also optically corrects for the three-chip projection so you don’t get color fringing in your highlights. Considering that, it seems to be a no-brainer on which method you would choose, until you consider cost. I got my B4-M43 adapter from ciecio7 for 240.00. That’s the entire cost of the “cheap” method. The “proper’ method is going to belt you for $5500.00 for the relay lens plus the cost of a PL adapter, because – btw – the HDX2 relay lens only comes in PL mount. SO, including the cost of PL/rails support for your AF100, we’re looking at a total cost of $7000.00 to be “proper” if you go with the HotRod-esque option. Ciecio7 also makes a PL-M43 adapter if you already have rails that would work, like I did.

I figured from the start that I was just going to put up with a little color fringing in my highlights. But then, I had a pleasant surprise. The Fujinon 10×4.8* is a really high quality piece of glass, and also considering that it’s so wide, fringing is very minimal. In fact, I don’t notice it at all unless my highlights are totally blown out, and even then, not all the time. In short, the picture looks pretty damned good. I’m sure the “proper” method is better, but I’m not positive that it’s $7000-better. Note that if you use the cheap method, your ENG lens MUST have a built-in 2X extender. With the HDX2, your lens does not need an extender, as the HDX2 doubles the size of the lens’ image circle.

Screen Grab: Fujinon 10x4.8 SD ENG lens on Panasonic AF100 recorded ProRes422 to Atomos Samurai
Post-grade Screen Grab: Fujinon 10x4.8 SD ENG lens on Panasonic AF100 recorded ProRes422 to Atomos Samurai.Click through to see a 100% crop.
Screen Grab: Fujinon 10x4.8 SD ENG lens on Panasonic AF100 recorded ProRes422 (HQ) to Atomos Samurai
Post-grade Screen Grab: Fujinon 10x4.8 SD ENG lens on Panasonic AF100 recorded ProRes422 (HQ) to Atomos Samurai.Click through to see a 100% crop.

* A note about the Fujinon 10×4.8 ENG SD lens: Some variants of it have a 1.7X extender and NOT a 2X extender. These will NOT WORK. You must have a 2X extender to expand the image circle to 22mm in order to cover the Micro 4/3 sensor.

On Set: AF100 Commercial Shoot

shooting in bright sun sucks.
I love shooting in bright sun </sarcasm>

I had a job last weekend, directing and shooting a commercial for a prominent local plastic surgeon. The client wanted a cinematic look, with models in various scenes shot in a fancy house. Check. With my 1AC, Dave Novak, and Supergrip Greg Ventura, we knocked it out in what ended up being a really fun day of shooting.

Since the client wanted a cine look, I of course used my Panasonic AF100 to shoot the spot, relying on Zeiss primes and a Canon 16-35/2.8 L II to refract the light for me. Footage was recorded via HD-SDI to an AJA Ki Pro Mini.

AJA Ki Pro Mini in action on a Panasonic AF100
AJA Ki Pro Mini, powered by an Anton Bauer Hytron 140 brick.

The client wanted everything to be in slow motion, so in order to get the footage onto the AJA recorder, I had to shoot in 720/60p and convert to 30p in post, as the Ki Pro Mini does not support variable frame rate mode… yet. Hopefully a firmware update will fix that problem soon, and yes, it is a problem. To be fair though, I don’t know of a recorder that does support 1080p/60 yet, although I think the Cinedeck might. At $10k though, I’m not even going to bother to go to their website to check.

Since I knew the client was going to want a significant amount of post processing, I wasn’t about to record to AVCHD; I had to go 4:2:2 out to the Ki Pro Mini.

The shoot went really well, and I’m very happy with the results. The best thing about this shoot is that this job allowed me to pull the trigger and order my copy of DaVinci Resolve, so I can finally update my color grading capabilities into the 21st century. It should arrive Friday. I can’t wait to try it out on this commercial!

BTW, I learned on this shoot that although they are of the finest glass, Schneider filters still won’t survive a fall onto a large rock. Take that wisdom with you into the future.

 

Panasonic AF100 on location in San Antonio
Panasonic AF100 on a Dana Dolly, on location in north San Antonio.
A rough frame grab from the shoot with the AF100. Lens: Zeiss ZE 50/1.4 Planar.
A rough frame grab from the shoot with the AF100. Lens: Zeiss ZE 50/1.4 Planar.

Directing a commercial shoot with the Panasonic AF100.Yours truly directing a commercial shoot with the Panasonic AF100.
Dropped Filter Blues
This is what a guy looks like when he's fuming about having just dropped his Schneider 4x4 Tru-Pol filter on a rock.